Virtual machine and hardware deployment
Specifying a VM or bare metal platform is difficult because every network is different (i.e. number of users, devices, polled MIB objects, syslog/trap/NetFlow rates). AKIPS recommends starting with a VM installation to determine a resource baseline required for monitoring your infrastructure and then increase the CPU/RAM/Storage resources as needed.
As a general rule, we recommend:
NOTE: Before purchasing physical hardware, contact AKIPS support with your intended vendor/model/spec so we can confirm the operating system has the appropriate disk and Ethernet controller driver support.
AKIPS is known to work on the following virtual machine platforms:
Minimum Recommended Platform
|Network Size||Minimum Platform|
System Resources: Ping and SNMP Polling
System Resources: Syslog and SNMP Trap
System Resources: NetFlow
The AKIPS flow collector and meters were engineered in the expectation of a large number of flow records (e.g. 1 million flows per second) from a small number of flow exporters (e.g. 50 to 100). The software performs as expected in that environment when ample CPU cores and RAM is available.
What was unexpected was customers wanting to send flows from 1000s of flow exporters. A flow meter process is started for each flow exporter, which means 1000s of concurrent meter processes. This issue is being investigated and will be rectified by allowing a meter process to handle data from many flow exporters, therefore significantly reducing the number of running processes.
Increasing the specs of a VM
The procedure of increasing CPU/RAM/Storage sizes in a VM is trivial:
System Performance Graphs
Comparing raw CPU core clock speeds is a fairly meaningless due to differences in core architectures (e.g. number of on die cores, L1/2/3 cache sizes and speeds). AKIPS performs various CPU speed tests for gzip/md5/sha which can be viewed in the Admin -> System -> System Info menu. The following are some examples:
|Xeon E5-2683 v3 2.00GHz||1.7||2.9||3.6|
|Xeon E5-2660 2.20GHz||1.9||4.0||3.7|
|Xeon E5-2670 v3 2.30GHz||1.4||2.8||2.9|
|Xeon E5-2630L v2 2.40GHz||1.5||3.0||3.3|
|Xeon E5-2670 2.60GHz||1.2||2.7||3.3|
|Xeon E5-4650 2.70GHz||1.3||2.8||3.4|
|Xeon X5660 2.80GHz||2.6||3.7||4.8|
|Core i5-2500K 3.30GHz||1.1||2.4||2.9|
|Core i7-5820K 3.30GHz||1.1||2.2||2.3|
Memory speed is fairly critical for performance. The Admin -> System -> System Info menu will display the memory speed of your system. A value of 8 Gigabytes/sec or greater is recommended. Older/legacy systems appear to have poor memory speed (e.g. 5 Gigabytes/sec or less).
Over provisioning memory in a VMware VM works fine because AKIPS loads the necessary kernel module that performs memory ballooning. Memory ballooning allows the guest VM to gracefully hand back unused free memory to the host machine.
UNIX file systems require plenty of spare space so they can write files out sequentially. In a VM it isn't such an issue because increasing the storage size is trivial. When deploying on physical hardware, it's best to install enough disk space up front for the entire life cycle of the box (e.g. several terabytes). Disks are cheap. Contact AKIPS support if unsure on disk space requirements.
Sequential Read / Write Performance
Databases typically access storage in a random order, but AKIPS databases are arranged in a manner so the majority of read/write I/O is performed sequentially. The large databases are repacked if they become more than 1% fragmented. Good sequential I/O performance is important in large installations.
Spindles vs SSD
A modern SATA 2Tbyte disk typically gets over 200Mbytes/sec sequential transfer rates, whereas a SSD typically gets ~400Mbytes/sec read, but somewhat slower write performance because SSD uses a copy-on-write mechanism where every write operation has to be written to a zeroed disk block. That is how SSD works. The painfully slow part of SSD is zeroing disk blocks. If there are no zeroed blocks available for a write operation, write performance falls off a cliff while unused blocks are zeroed.
Having a large pool of pre-zeroed blocks greatly enhances consistent write performance. The SSD trim feature (turned on by default in AKIPS) allows the operating system to inform the SSD when a disk block can be zeroed. Some SSDs also have a hidden pool of pre-zeroed blocks.
DAS vs SAN vs NAS
DAS and SAN provide efficient "block level" storage to the operating system, whereas a NAS is just a "file store" accessed over 10G Ethernet/IP/NFS. A NAS will have significantly higher latency and fragmentation performance issues compared to a SAN/DAS.
Thick vs Thin Provisioning
Do NOT use thin provisioned dynamically allocated storage. It ALWAYS leads to massive database performance problems due to fragmentation. AKIPS reads/writes large sequential database files and expects minimal underlying block level fragmentation and latency.
Using thin provisioned storage is also pointless because AKIPS uses a copy-on-write file system, therefore all disk blocks on the virtual storage will be quickly allocated and consumed, but in a highly fragmented order.